Replacing a button cap

Steps

1. Remove the two screws (PH10-3) on the button plate PH10-2)
2. Remove the button plate (PH10-2)
3. Using a flat headed screw driver as a lever press firmly beneath the button cap (PH10-74) until it pops off
4. Press the new button cap (PH10-74) in place of the old button
5. Place button plate (PH10-2) back on the handle
6. Tighten screws (PH10-3)

Parts needed

Part No.	Description
PH10-2	Button Plate (Black)
PH10-3	Button Plate Screw
PH10-74	Snap-On Button Cap