Removing the Tube Collector

Preparation

When doing this there will be remaining syrup in the gun, be sure and have water and a towel ready to keep things clean
Turn off the shut off screws (see video).

Steps

1. Remove the Kwik klips (PM10-16)
2. Press the cam knob (PM10-20) and pull firmly, wiggling the tube collector (PM10-30) from side to side until it has completely disconnected

Additional Information - If one of the kwik klips pop all the way out of the holes, it can be put back in by inserting each end back into the appropriate hole.

Parts needed

Part No.	Description
PM10-16	Kwik Klip
PM10-20	Cam Knob
PM10-30	Tube Collector Cover