Brixing a flow regulated bargun


  1. Remove Nozzle (PH10-60)
  2. Put Syrup separator (PH10-83) onto diffuser
  3. Get brix cup (PH10-35), put syrup hole into small, water into large
  4. Remove the flow regulated manifold cover (FR-15)
  5. Loosen the nut (FR-11) on the relevant flow regulator
  6. Turn the screw (FR-10) counter clockwise to increase the flow, clockwise to decrease the flow
  7. Measure the brix ratio with the brix cup (PH10-35), Repeat step 6 and 7 until brix ratio appropriately set
  8. Tighten the flow regulator screw (FR-10) and re-attach flow regulated manifold cover

Parts needed

Part No. Description
PH10-60 Series II.5 Nozzle (Black)
PH10-83 Syrup Separator with Plug
PH10-35 Brix Cup - 5:1 - 5-5:1 Ratio