English čeština Deutsch

Replacing a Valve

    Preparations
  • Turn off all shut off screws (see video)
  1. Steps
  2. 1. Remove the bottom plate (PH10-27) by unscrewing all 5 screws (PH10-7)
  3. 2. Find the valve (PH10-89) to replace, the numbers above the valves (PH10-89) correspond to the numbers on the manifold
  4. 3. Remove the two screws (PH10-3) on the button plate (PH10-2) and remove the button plate (PH10-2)
  5. 4. Remove the two screws (PH10-7) holding the butterfly plates (PH10-9-1HR | PH10-9-1HL | PH10-9-2 | PH10-9-3HL | PH10-9-3HR) and then remove them
  6. 5. Remove the stem retainers (PH10-XXX)
  7. 6. Turn the hat (PH10-125) with a screwdriver and remove the hat (PH10-19), spring (PH10-24) and the O-ring (PH10-29) from the valve chamber
  8. 7. On the valve that you intend to replace, using a screw driver press the stem pushing the valve through the chamber
  9. 8. insert the new valve into the chamber
  10. 9. Re-insert the hat and hat o-ring by turning the hat 90 degrees locking the wings of the hat (PH10-125 under the edge of the handle (PH10-113)
  11. 10. Reattach the bottom plate (PH10-27) by screwing in the five screws (PH10-7) (Don't overtighten)
  12. 11. Replace the stem O-ring retainers (PH10-52 or PH10-110) ensuring that the crossed side of the retainers is facing up.
  13. 12. Place the butterfly plates (PH10-9-XX) onto the handle (PH10-113)
  14. 13. reinsert the butterfly screws (PH10-7) and butterfly retainer (PH10-8) and screw tightly (don't overtighten!), make sure the butterflies (PH10-9-XX) are snuggly seated
  15. 14. Place button plate (PH10-2) back on the handle and tighten screws
  • Cleanup
  • Reactivate the pressure to the bargun by turning the shutoff switches to the open position
  • Test the handle for any leakage
  • Parts needed
    Part No. Description Price Add to cart
    PH10-27 Bottom Plate (10 button) - Black 1,07 € Buy
    PH10-7 Bottom Plate Screw 0,17 € Buy
    PH10-3 Button Plate Screw 0,17 € Buy
    PH10-2 Button Plate (Black) 3,04 € Buy
    PH10-125 0,00 € Buy
    PH10-19 Tube Seal O-Ring 0,09 € Buy
    PH10-24 Valve Spring 0,24 € Buy
    PH10-8 Butterfly retainer 0,41 € Buy
    PH10-29 0,00 € Buy
    PH10-113 0,00 € Buy
    PH10-52 0,00 € Buy
    PH10-110 0,00 € Buy
    PH10-9-1HL Plate - 1Hole-Left Hand 3,04 € Buy
    PH10-9-1HR Plate - 1Hole - Right Hand 3,04 € Buy
    PH10-9-2H Butterfly plate - 2 hole 3,04 € Buy
    PH10-9-3HL Butterfly plate - 3 hole left 3,04 € Buy
    PH10-9-3HR Plate - 3Hole - Right Hand 3,04 € Buy