Cleaning a Flow Regulator
- Preparations
- Turn off the shut off screws (see video)
- Steps
- 1. Remove the flow regulator hood (FR-15)
- 2. Remove the shut-off swtich hood (FR-71)
- 3. Remove the two screws (FR-41) from the flow regulator that you wish to clean
- 4. Remove the flow regulator cap (FR-9), O-ring (FR-14) and spring (FR-29)
- 5. Remove the ceramic cylinder (FR-7C | FR-4C) and piston (FR-6C
FR-60C | FR-3C) - 6. Remove the bottom O-ring (FR-28)
- 7. Clean out the inside of the chamber with a cotton swab
- 8. Wash the two ceramic cyclinders under tap water
- 9. Reinsert the bottom O-ring (FR-28) at the bottom of the chamber
- 10. Reinsert the ceramic cylinders (FR-XX) into the flow regulator chamber, ensuring they are put back in the chamber exactly as they came out
- 11.Replace the flow regulator cap (FR-9), O-ring (FR-14) and spring (FR-29) into the flow regulator chamber
- 12.Reinsert the flow regulator screws (FR-41) and replace the flow regulator hood (FR-15).
- Cleanup
- - Turn all shutoff screws back to the on position
Print
Forward