English čeština Deutsch

Changing the butterfly plates

  1. STEPS
  2. 1. Remove the two screws (PH10-3) on the button plate (PH10-2)
  3. 2. Remove the button plate (PH10-2)
  4. 3. Remove the two screws (PH10-7) holding the butterfly retainer (PH10-8)
  5. 4. Remove the butterfly plates (PH10-9-1HR | PH10-9-1HL | PH10-9-2 | PH10-9-3HL | PH10-9-3HR)
  6. 5. Find the proper carbonated/non carbonated configuration that you are looking for on page 10 and 11 of the M4 bargun user manual
  7. 6. Place the new butterfly plates (PH10-9-XX) onto the handle (PH10-113)
  8. 7. Reinsert the butterfly screws (PH10-7) and butterfly retainer (PH10-8) and screw tightly (don't over tighten!), make sure the butterflies (PH10-9-XX) are snugly seated
  9. 8. Place button plate (PH10-2) back on the handle
  10. 9. Tighten screws (PH10-3)
  • Parts needed
    Part No. Description Price Add to cart
    PH10-3 Button Plate Screw 0,17 € Buy
    PH10-2 Button Plate (Black) 3,04 € Buy
    PH10-7 Bottom Plate Screw 0,17 € Buy
    PH10-8 Butterfly retainer 0,41 € Buy
    PH10-9-1HL Plate - 1Hole-Left Hand 3,04 € Buy
    PH10-9-1HR Plate - 1Hole - Right Hand 3,04 € Buy
    PH10-9-2H Butterfly plate - 2 hole 3,04 € Buy
    PH10-9-3HL Butterfly plate - 3 hole left 3,04 € Buy
    PH10-9-3HR Plate - 3Hole - Right Hand 3,04 € Buy