Brixing a Metering Screw Bargun
- Steps
- 1. Remove the Nozzle (PH10-60)
- 2. Put on the syrup separator (PH10-83)
- 3. place the syrup separator (PH10-83) into the brix cup (PH10-35) and do a trial dispense
- 4. Remove the protective cover (PM10-103) on the manifold
- 5. adjust the metering screws (PM10-6), counter clockwise will increase flow, clockwise will decrease flow
- 6. Dispense drink and check the ratio in the brix cup (PH10-35), repeat process until you have the desired ratio
- 7. Reattach the nozzle (PH10-60)
- 8. Reattach the shutoff screw guard (PM10-103)
Print
Forward